Masling Industries NDT testing facility offers customers personal attention
with total focus on their needs. The inspection processes are performed in accordance
with the following Standards as required:-
1. ASTM-E-1417
2. ASTM-E-1444
3. AS1171
4. AS2062
 |
Dye Penetrant InspectionLiquid Penetrating testing is probably the most widely used NDT method. The test object or material is coated with a fluorescent dye solution. The excess dye is removed from the surface, and then a developer is applied. The developer acts like a blotter and draws penetrant out of imperfections that are open to the surface. With fluorescent dyes, an ultraviolet lamp is used to make the "bleed out" fluoresce brightly, thus allowing the imperfection to be seen readily. |
 |
Magnetic Particle InspectionMagnetic Particle testing is performed by inducing a magnetic field in a ferro-magnetic material and covering the surface with fluorescent particles suspended in a carrier fluid. Surface imperfections will distort the magnetic field and concentrate the iron particles near the imperfections, thus indicating their presence. |
 |
Masling
Industries Pty. Ltd.
(Airport Hangar 3)
PO Box 511
Cootamundra NSW 2590
AUSTRALIA
Phone: +61 2 6942 3155
Fax: +61 2 6942 3250